Sun Simulator(XJCM-9A)

Sun Simulator(XJCM-9A)

【Characteristics】1.Low height upward illumination and small footprint allow integration into automated module assembly lines 2.I-V curve,Voc,Isc,Pm,Vm,Im,FF,Tm. 3.Uniformity of illumination ±2% (A class)over entire test area. 4.Twice flash test with pulse time ( 2x10ms),  ASTM E927 and (IEC 60904) Class A spectrum , intensity can be adjusted from 20 to 120mW/cm2,measured by calibrated reference cell.5.constant intensity, instability<0.5% (A class)6.Tests either crystalline or thin film modules and cells. 7.Software provides system diagnostic and saves module parameters and IV curves to database.

【Specification】

1.Maximum Module Dimensions:(other XJCM-9A SUN SIMULATOR sizes are available) length: 200cm width: 100cm
2.Light source :Long-arc pulsed xenon lamp,
Pulse Width: 20ms
Full area intensity: 20 to 120mW/cm2
lamp lifetime nomina:300,000 flashes
3.Illumination Uniformity
±2% over 200cm x 100cm area
4.Measurement Range
Voltage: 0-50V
Current: 0-10A
5.Resolution:(lowest range)
Voltage: 1mV
Current: 0.5mA
6.Equipment Dimensions
(excluding computer system)
Width: 150cm
Depth: 250cm
Height: 90cm
7.Equipment Net Weight
700 Kgs
Electricity: 190-240VAC,10A,50/60Hz,single phase
8.Utilities Requiremnts
Electricity: 190-240VAC,10A,50/60Hz,single phase